Die casting oils
Mold releasing agent for die casting
Our products are very economical because of good adhesion to metal, mold releasability, fluidity.
|
Hirelease 100 for zinc, aluminium Oiliness |
The mold releasing oil for zinc, aluminium. Controllable stains when working because of no content of pigments in oil. Good workability because of low viscosity and dilutablility easily. Use by diluting with kerosene or mineral spirits, and so on. (Volume/Packing : 200 L/drum, 18 L/can) |
|
Hirelease OF-2 for zinc, aluminium Oiliness |
The mold releasing oil for zinc, aluminium.
Controllable stains when working because of no content of pigments in oil. Finishable beautifully due to be difficult to leave a brown oil stain on the casting surface.
Use by diluting with kerosene or mineral spirits, and so on. (Volume/Packing : 18 L/can) |
|
Hirelease W500X-A for alminium Water-soluble |
The mold releasing oil for aluminium. Stable emulsion. Good workability. Finishable beautifully due to be difficult to leave a brown oil stain on the casting surface. Use by diluting with water. (Volume/Packing : 20 L/pail) |
Representative properties
| Product name |
Color (ASTM) |
Density (15℃,g/cm3) |
Kinematic viscosity (40℃,mm2/s) |
Flash point (℃) |
| Hirelease 100 | <5.0 | 0.900 | 46.5 | >200 |
| Hirelease OF-2 | <2.0 | 0.900 | 387 | >250 |
| Product name |
Appearance |
Density (15℃,g/cm3) |
ｐH |
Diluting magnification |
|
Hirelease W500X-A |
Milky white, emulsion | 1.00 | 7.0～8.0 | 20～50 |
Plunger lubricant for die casting machine
The following products is added the purified graphite and various additives.
Use for the sleeves, chips, pistons which presses a molten metal into the mold of a die-cast
machine.
|
PSL Pasty High flash point |
Pasty at room temperature. Continues the lubrication performance and extend the life of the plunger because of low coefficient of friction, no corrosion, good adherability and spreadability to sleeves, plungers. Enable to keep good working environment because of less likely to ignite and low fume. (Volume/Packing : 16 L/can) |
|
PSL-32 High viscosity liquid High flash point |
High viscosity lubricant suitable for automatic lubrication Continues the lubrication performance and prevent seizing because of low coefficient of friction, good adherability and spreadability to sleeves, plungers. Enable to keep good working environment because of less likely to ignite and low fume. (Volume/Packing : 16 L/can) |
|
PSL-34 Pasty High flash point |
Higher viscosity than PSL. Extending the life of the plunger because of no corrosion, good adherability and spreadability to sleeves, plungers. As a result, Enable to increase the number of Molding.
Enable to keep good working environment because of less likely to ignite and low fume.
(Volume/Packing : 16 L/can) |
Representative properties
| Product name |
Appearance |
Density (15℃,g/cm3) |
Viscosity (40℃,Pa・s) |
Coefficient of friction |
Flash point (℃) |
| PSL | Black, pasty | 1.07 | 1.70 | <0.130 |
>200 |
| PSL-32 | Black, high viscosity liquid | 1.00 | 1.15 | <0.130 | >200 |
| PSL-34 | Black, pasty | 1.00 | 2.50 | <0.130 | >200 |
